Welding & project operations
Which Welding Process To Use: Selection Assistant
This assistant compares the four common welding processes, stick (SMAW), MIG/MAG (GMAW), flux-cored (FCAW) and TIG (GTAW), for your job. Answer questions about the metal, thickness, location, positions, amount of welding, appearance, skill and surface condition, and it ranks the processes with the reasons, then lists the equipment, consumables, advantages and limitations of the top two.
- Free, no sign-up
- Runs in your browser
- Built for Islamabad & Rawalpindi
This free calculator runs in your browser and needs JavaScript. If it does not load, call or WhatsApp us on +92 304 2435577 and we will do the calculation for you.
There is rarely one right answer. A windy site favours stick or self-shielded flux-cored wire; thin stainless that will be on show favours TIG; a run of identical gate frames favours MIG. Seeing the trade-offs side by side helps when buying a machine or planning a job.
What This Tool Does
It adds simple weights for each answer and explains which answers pushed each process up or down. Equipment you already own counts in its favour.
Who It Is For
- Workshop owners choosing or adding a welding machine.
- Welders planning a site job.
- Students learning where each process fits.
How To Use It
- Answer each question for the job you have in mind.
- Tick the machines you already have.
- Click Compare processes.
- Read the reasons, then the equipment and limitations for the top two.
How The Calculation Works
Each answer adds or subtracts points for each process: for example, outdoors adds points to stick and self-shielded flux-cored and subtracts from MIG and TIG, because shielding gas blows away. Aluminium removes stick and flux-cored as practical options. The ranking is the total.
Worked Example
3 mm aluminium window frames, indoors, neat appearance, experienced welder.
| Input or result | Value |
|---|---|
| First | TIG: best control and appearance on aluminium |
| Second | MIG with a spool gun or push-pull feeder |
| Not suitable | Stick and flux-cored |
Change to mild steel gate frames in a windy yard and stick moves to the top.
Features And Benefits
- Reasons, not just a ranking.
- Equipment and consumables listed.
- Accounts for what you already own.
Assumptions And Accuracy Limits
- A guide for discussion, not a qualification. Code work follows the approved WPS.
- Pulsed, spray and other transfer modes are not modelled separately.
Common Mistakes To Avoid
- Choosing on price alone. A cheap machine that cannot weld the metal or position wastes more than it saves.
- MIG in the wind. Gas-shielded wire outdoors gives porosity.
- Ignoring surface condition. Rusty or painted steel suits stick and flux-cored better than MIG or TIG.
Welding Work In Islamabad And Rawalpindi
Most gate, grill and shed work in the twin cities is mild steel welded with stick, because it copes with site wind and load-shedding generators. MIG suits batch work in the workshop, and TIG is used for stainless railings and aluminium. Ramzan Steel Works uses all three as the job needs.
Frequently Asked Questions
Which welding is best for beginners?
MIG is usually the easiest to learn on clean steel indoors. Stick is cheaper and works outdoors but takes more practice.
Which welding is strongest?
Any of the processes can make a full-strength weld with the right consumable and procedure. Strength comes from correct parameters and fusion, not the process name.
Can I MIG weld outdoors?
Not well with gas-shielded wire in wind. Use stick, self-shielded flux-cored wire, or screens.
What is best for aluminium?
AC TIG for quality and thin material; MIG with a spool gun for speed on thicker sections.
Related Free Tools
- Welding Electrode & Wire Classification DecoderType E6013, E7018, ER70S-6, E71T-1, E308L-16 or ER5356 and see what every part of the code means.
- Welding Machine Electricity Consumption & Cost CalculatorEstimate units (kWh) and PKR electricity cost per hour, day, month and job from the machine nameplate.
- Shielding Gas Cylinder Runtime & Cost PlannerFind how long an argon, CO2 or mixed-gas cylinder lasts at your flow rate and what the gas costs per job.
- Welding Job Cost, Labour & Overhead EstimatorBuild a welding job price from materials, labour, consumables, overheads and your margin.
Get A Measured Quotation
Ramzan Steel Works welds steel, stainless and aluminium across Islamabad and Rawalpindi with the process each job needs.
