Glass & glazing

Shower Cabin Size Planner For Pakistan

Shower cabins fail on fit far more often than on glass. The cabin is ordered to a size that sounds reasonable, and then the door cannot open because the washbasin is in the way, or the remaining floor space turns out to be too tight to stand in while drying.

Free, no sign-up
Runs in your browser
Built for Islamabad & Rawalpindi

This free calculator runs in your browser and needs JavaScript. If it does not load, call or WhatsApp us on +92 304 2435577 and we will do the calculation for you.

This planner checks the geometry first. Enter the bathroom and the cabin you have in mind, choose the door type, and it draws the floor plan, flags the conflicts and estimates the glass area.

What This Tool Does

It draws a scale floor plan with the cabin in place, checks the cabin against the bathroom and the space left around it, warns about hinged doors that have nowhere to swing, and calculates the glass run area, weight and budget.

Who It Is For

Homeowners renovating a bathroom.
Builders and plumbers checking a cabin will fit before ordering.
Glaziers sizing the glass for a cabin.

How To Use It

Measure the bathroom, width and depth.
Choose the layout: corner with two glass sides, alcove with one, or a straight inline screen.
Enter the cabin size you have in mind. Inches are usually easiest here.
Choose the door type. Sliding needs no swing space, hinged does.
Set the glass height and thickness, and add a rate for a budget.

Inputs And Units Explained

Bathroom width and depth — the room, so the tool can check what is left around the cabin.
Cabin width and depth — the enclosure footprint. Anything under about 32 inches a side feels tight for an adult.
Layout — corner, alcove or inline, which decides how much glass there is.
Door type — sliding, hinged or a fixed screen with an open entry.
Glass height and thickness — 8 or 10 mm tempered is usual for cabins.

How The Calculation Works

The glass run is the sum of the glazed sides for the layout chosen: two sides for a corner, one for an alcove or inline screen. Area is that run times the glass height, and weight uses the standard 2.5 kg per square metre per millimetre, so 8 mm glass is 20 kg per square metre.

The fit checks compare the cabin against the room, the space left on each side, and for a hinged door the clear floor needed to swing it. The plan view draws the cabin in the corner with the swing arc where relevant, so a conflict is visible rather than described.

Worked Example

A 7 by 6 foot bathroom with a 36 by 36 inch corner cabin, 72 inch glass height in 8 mm.

Input or result	Value
Bathroom	7 ft × 6 ft
Cabin	36 in × 36 in, corner layout
Glass run	two sides, 72 in high
Glass weight	about 20 kg per square metre at 8 mm

The plan shows the cabin in place and what is left of the bathroom. Push the cabin out to 8 feet wide in the same room and the tool flags that it is now wider than the bathroom, which is the sort of error that is obvious on a drawing and invisible on a shopping list.

Features And Benefits

A scale floor plan rather than a size in your head.
Honest warnings about tight cabins and hinged doors with nowhere to open.
Glass area, weight and budget in the same place.
A measurement checklist for the survey, including the tile and threshold details that catch installers out.

Assumptions And Accuracy Limits

It does not specify glass thickness, hinge ratings or waterproofing. Those are installer decisions.
Tray, slope and drain position are not modelled.
Walls are assumed square and plumb, which bathroom walls frequently are not.

Common Mistakes To Avoid

Ordering before measuring at two heights. Tiled walls lean, and a cabin cut to the floor measurement will not fit at the top.
Choosing a hinged door in a small bathroom. Sliding solves it and costs little more.
Forgetting the drain. The cabin has to sit where the water goes.
Assuming any glass will do. Shower glass should be tempered, without exception.

Shower Cabin Size And Layout For Pakistani Bathrooms

Bathrooms in many Islamabad and Rawalpindi houses are compact, so a shower cabin has to fit between a basin, a commode and a wall without making the room hard to use. The usual choices are a corner cabin with a sliding or swing door, or a simple glass partition across part of the bathroom.

Enter the space you can spare and the door type, and the planner suggests a cabin size, the glass area and weight, and the clearance you need to open the door fully.

Frequently Asked Questions

What is a comfortable shower cabin size?

Around 36 by 36 inches is a common minimum that most adults find workable, and anything under about 32 inches a side starts to feel cramped. The planner will accept smaller sizes but will warn you.

Should the door slide or swing?

In a small Pakistani bathroom, sliding is usually the safer choice because it needs no clear floor to open into. A hinged door is fine when there is genuinely space in front of it, which the tool checks.

What thickness glass for a shower cabin?

Eight and ten millimetre tempered are both common, with the choice depending on the panel size and hinge type. The tool does not pick for you, because a shower door is a safety item and that call belongs with the installer.

What is a good size for a shower cabin?

A cabin about 3 by 3 feet is a minimum for comfort, and 3 by 4 feet is more comfortable. Measure your own space and test sizes in the planner.

Which is better, a sliding or swing shower door?

Sliding doors save space in small bathrooms. Swing doors give a wider opening but need clear floor space to swing.

Related Free Tools

Get A Measured Quotation

Bathroom walls are rarely plumb and tiles make that worse, so the cabin should be measured at more than one height before ordering. Ramzan Steel Works measures and fits shower cabins in Islamabad and Rawalpindi.