Glass & glazing
Glass Partition Layout Planner, Pakistan
A glass partition is mostly a measuring problem. The glass itself is straightforward; what decides whether the job goes smoothly is whether the panel widths were worked out from the real opening, including the fact that the floor is not level and the walls are not plumb.
- Free, no sign-up
- Runs in your browser
- Built for Islamabad & Rawalpindi
This free calculator runs in your browser and needs JavaScript. If it does not load, call or WhatsApp us on +92 304 2435577 and we will do the calculation for you.
This planner splits a measured run into equal panels with a door where you want one, draws the elevation, and lists the panel sizes. It also gives you the survey questions that catch the problems before the glass is cut, which matters because toughened glass cannot be trimmed on site.
What This Tool Does
It divides the opening into the number of fixed panels and doors you specify, allows for the frame or patch gap between them, draws a scale elevation, lists the panel schedule and totals the glass area, weight and budget at your rate.
Who It Is For
- Office and shop owners planning a partition or a glass front.
- Shopfitters and interior contractors preparing a layout for pricing.
- Glaziers showing a client the panel arrangement before cutting.
How To Use It
- Measure the run wall to wall, and the height floor to ceiling. Measure the height at three points, because floors slope.
- Decide how many fixed panels you want and whether there is a door, then set the door width.
- Set the gap between panels for the frame, patch fitting or silicone joint.
- Pick the glass thickness. Twelve millimetre is the usual choice for frameless office fronts.
- Add your glass and fitting rate per square foot for a budget.
Inputs And Units Explained
- Partition run and height — the opening the partition fills.
- Number of fixed panels — more panels means narrower, lighter, cheaper-to-handle glass.
- Doors and door width — the door is sized separately and the fixed panels share what is left.
- Gap between panels — for the channel, patch fitting or joint.
- Glass thickness — 8, 10 or 12 mm.
- Rate per square foot — for glass and fitting, yours.
How The Calculation Works
The door widths and the inter-panel gaps are taken off the total run, and what remains is divided equally between the fixed panels. The elevation is drawn to scale with each panel labelled with its width, and the schedule lists panel and door sizes with the glass area for each. Weight uses the standard glass density, 2.5 kg per square metre per millimetre of thickness, so 12 mm glass is 30 kg per square metre.
Worked Example
A 12 foot run, 9 feet high, with three fixed panels and one 3 foot door in 12 mm glass.
| Input or result | Value |
|---|---|
| Run and height | 12 ft × 9 ft |
| Door | 1 door at 3 ft |
| Fixed panels | 3 panels sharing the remaining width |
| Glass | 12 mm, about 30 kg per square metre |
The schedule gives each panel size and the total area for pricing. The weight figure tells you how many people are needed on installation day, which on a 9 foot panel of 12 mm glass is more than two.
Features And Benefits
- A scale elevation that makes the arrangement obvious.
- A panel schedule with sizes, ready to discuss with a glazier.
- Glass area and weight together, for budget and for handling.
- A site survey checklist aimed at the things that actually go wrong.
Assumptions And Accuracy Limits
- Panel sizes assume a level floor and plumb walls, which real buildings rarely offer. Final sizes come from a laser-level survey.
- The tool does not specify hardware, channels or fixings.
- It does not certify a glazing design. Thickness, toughening and any required film are the installer’s call.
Common Mistakes To Avoid
- Measuring the height in one place. Measure at both ends and the middle; the difference decides the panel height.
- Ordering toughened glass from a rough measurement. It cannot be cut afterwards.
- Forgetting what is above the ceiling line. A false ceiling may hide the beam the partition must fix to.
- Choosing very wide panels to save on joints. They are heavier, harder to carry upstairs and more expensive to replace.
Glass Partition For Offices And Bathrooms In Islamabad And Rawalpindi
Glass partitions are used to divide offices in Blue Area and Saddar, to separate a washroom shower area, and to close a shop front. The decisions are the same each time: panel width, glass thickness, where the door sits and how the glass is held, with a frame or with fittings only.
Enter the length and height of the partition and the panel width, and the planner lays out the panels, estimates glass area and weight, and flags panels that are too large or heavy for the thickness chosen.
Frequently Asked Questions
What thickness glass is used for office partitions?
Twelve millimetre toughened is the common choice for frameless floor-to-ceiling partitions, with 10 mm used in some framed systems. The right answer depends on panel size and the fixing method, which is a decision for your installer rather than this planner.
How heavy is a glass partition panel?
Twelve millimetre glass weighs about 30 kg per square metre, so a panel three feet wide and nine feet tall is roughly 75 kg. That is a four-person lift on a staircase, and worth planning before delivery day.
Can the panels be different widths?
In reality yes, and often they should be. This planner divides the run equally for a first layout; if you need unequal panels, use it to get the total area and discuss the split on site.
What glass thickness is used for a glass partition?
Offices commonly use 8 mm or 10 mm tempered glass, and washroom partitions often use 8 mm or 10 mm as well, depending on panel size. Heavier or taller panels need thicker glass.
Should a washroom glass partition be tempered?
Yes, tempered glass is the safe choice where people may lean or slip, because it breaks into small blunt pieces rather than sharp shards.
Related Free Tools
- Glass Area, Weight & Price CalculatorWork out pane area, theoretical glass weight and cost from your measurements and rates.
- Shower Cabin Size, Layout & Budget PlannerCheck whether a shower cabin fits your bathroom and estimate the glass area and budget.
- Glass Repair, Replacement & Quote ComparatorDocument a broken pane safely and compare replacement quotations on a like-for-like scope.
Get A Measured Quotation
The panel sizes above assume a level floor, which almost no building has. Ramzan Steel Works surveys partition runs with a level before anything is cut, because toughened glass does not get trimmed on site.