Ramzan
Steel Works

Steel & workshop materials

Pipe Cut Length Calculator: Spool Take-off Worksheet

This worksheet turns the centre-to-centre dimensions from a piping isometric into cut lengths. For each pipe piece choose the size and the fitting at each end, 90° or 45° long-radius elbow, equal tee, weld-neck flange, cap or a plain end, and it subtracts the fitting take-outs and root gaps. It then totals the pipe by size into stock lengths, counts the butt welds and the diameter-inches of welding, and works out the weight.

  • Free, no sign-up
  • Runs in your browser
  • Built for Islamabad & Rawalpindi

This free calculator runs in your browser and needs JavaScript. If it does not load, call or WhatsApp us on +92 304 2435577 and we will do the calculation for you.

The most common spool mistake is cutting pipe to the centre-to-centre dimension and forgetting the elbow. A 2″ long-radius elbow takes 76 mm off each end; two of them take off more than 150 mm.

What This Tool Does

It uses typical ASME B16.9 long-radius elbow and tee dimensions and ASME B36.10 Schedule 40 walls for ½” to 12″, and lets you enter a different wall and your flange maker’s take-out.

Who It Is For

  • Pipe fitters and fabricators cutting spools.
  • Estimators counting welds and pipe.
  • Supervisors checking cut lists.

How To Use It

  1. Set the root gap and, if you use weld-neck flanges, their take-out.
  2. Add each pipe piece with its size, centre-to-centre length and end fittings.
  3. Click Work out cut lengths.
  4. Download the CSV for the shop.

How The Calculation Works

Cut length = centre-to-centre − take-out at end A − take-out at end B − root gap × number of welded ends. Weight per metre = π × (OD − t) × t × 7,850 ÷ 10⁶. Diameter-inches = welds × nominal size.

Worked Example

A 2″ pipe piece, 1,000 mm centre to centre, with a 90° long-radius elbow at each end and a 3 mm root gap.

Input or result Value
Take-outs 76 + 76 mm
Root gaps 2 × 3 mm
Cut length 842 mm
Weight about 4.6 kg at 5.44 kg/m

Two butt welds and 4 diameter-inches of welding for this piece.

Features And Benefits

  • Take-outs built in for common sizes.
  • Stock lengths and weight by size.
  • Weld count and diameter-inches for estimating.

Assumptions And Accuracy Limits

  • Short-radius elbows, reducing tees, socket-weld and threaded fittings are not in the table.
  • Fitting dimensions vary slightly by maker; confirm before cutting.

Common Mistakes To Avoid

  • Cutting to centre-to-centre. Subtract the fittings first.
  • Forgetting the root gap. Each weld adds its gap to the spool length.
  • Mixing short- and long-radius elbows. A short-radius elbow takes out only 1 × the nominal size.

Pipe Work In Islamabad And Rawalpindi

Steel pipe for water lines, gas headers, handrails and structures is widely sold in the twin cities by nominal size, often in 6 m lengths, with schedule and wall that vary between suppliers. Measure the wall where it matters. Ramzan Steel Works fabricates pipe spools, railings and frames to drawing.

Frequently Asked Questions

How do you calculate pipe cut length between elbows?

Take the centre-to-centre dimension, subtract the centre-to-end dimension of each elbow, and subtract the root gap for each weld.

What is the take-out of a 90° long-radius elbow?

1.5 times the nominal pipe size in inches, converted to mm: 76 mm for 2″, 152 mm for 4″.

What are diameter-inches?

The number of welds multiplied by the nominal pipe size in inches, a common unit for estimating pipe welding.

What is the OD of 2 inch pipe?

60.3 mm, for all schedules; the wall thickness changes the inside diameter.

Related Free Tools

Get A Measured Quotation

For pipe spools, headers and pipe frames fabricated to your drawing, contact Ramzan Steel Works in Islamabad and Rawalpindi.

Share this
0304-2435577WhatsApp Us