Ramzan
Steel Works

Aluminium systems

Window Opening Area And Ventilation Checker

This checker compares how much of each window actually opens. Enter the windows in a room with their type, size and opening angle, and it calculates the gross opening, the clear glass area and the openable area, then compares the total with a ventilation target for the room’s floor area.

  • Free, no sign-up
  • Runs in your browser
  • Built for Islamabad & Rawalpindi

This free calculator runs in your browser and needs JavaScript. If it does not load, call or WhatsApp us on +92 304 2435577 and we will do the calculation for you.

A 2-panel sliding window opens only half its width; a top-hung window opened a little gives much less airflow than its size suggests. When choosing window types for a hot room, the openable area is the figure that matters.

What This Tool Does

It models sliding windows by the panels that slide clear and hinged sashes by the gap their opening angle makes, then totals and compares with your target percentage.

Who It Is For

  • Homeowners choosing window types.
  • Architects and builders.
  • Aluminium fabricators advising customers.

How To Use It

  1. Add each window with type, size, opening angle (hinged) and quantity.
  2. Set the frame sight-line, room floor area and target.
  3. Click Check openings.

How The Calculation Works

Clear area = (W − 2 × sight-line) × (H − 2 × sight-line). Sliding: 2-panel and 4-panel open about 50%, 3-panel on three tracks about 2/3. Hinged: free edge × swing chord + two side triangles, capped at the clear area.

Worked Example

A 150 sq ft room with a 5 × 4 ft 2-panel sliding window and a 2 × 2 ft top-hung window open 30°, 60 mm sight-lines, 5% target.

Input or result Value
Sliding openable about 8.3 sq ft
Top-hung openable about 2.6 sq ft
Total vs target about 10.9 sq ft against 7.5 sq ft

The room meets a 5% target.

Features And Benefits

  • Compares window types fairly.
  • Room target check.
  • CSV table.

Assumptions And Accuracy Limits

  • Geometric estimate, not an airflow test.
  • Bylaws and fire escape rules may set other requirements.

Common Mistakes To Avoid

  • Counting the whole window. A sliding window opens about half.
  • Small opening angles. A top-hung sash at 15° gives little airflow.
  • Forgetting the frame. Sight-lines reduce the clear opening.

Window Ventilation In Islamabad And Rawalpindi

Long hot summers make ventilation important in the twin cities, and sliding aluminium windows are the most common type. Where more airflow is needed, a casement or a 3-panel sliding window can help. Ramzan Steel Works advises on window types for each room.

Frequently Asked Questions

How much of a sliding window opens?

About half of a 2-panel or 4-panel sliding window, and about two thirds of a 3-panel window on three tracks.

How much window opening does a room need?

Many guides use around 5% of floor area as openable area for natural ventilation; check your local rules.

Do casement windows ventilate better than sliding?

A fully open casement can use almost all its area, so yes, for the same size.

Related Free Tools

Get A Measured Quotation

Ramzan Steel Works supplies sliding, casement and top-hung aluminium windows in Islamabad and Rawalpindi.

Share this
0304-2435577WhatsApp Us