Ramzan
Steel Works

Steel & workshop materials

Paint Required For Steel: Coverage And DFT Calculator

This calculator works out how much primer or paint a steel job needs. List the pipes, square tubes, flats, angles and sheets with their lengths, and it calculates the surface area. Then it uses the paint’s volume solids and the dry film thickness (DFT) you want to give the theoretical litres, the litres to buy after losses, the wet film thickness to apply and the cost.

  • Free, no sign-up
  • Runs in your browser
  • Built for Islamabad & Rawalpindi

This free calculator runs in your browser and needs JavaScript. If it does not load, call or WhatsApp us on +92 304 2435577 and we will do the calculation for you.

“How many litres for a gate” is usually guessed, and the guess is usually low, because grills and railings have far more surface than they look, and spraying open steelwork wastes a lot of paint. Using the paint’s own data sheet figures makes the estimate defensible.

What This Tool Does

It calculates the painted surface per member from outside dimensions, the theoretical spreading rate in m² per litre, litres for the number of coats, litres to buy with your loss allowance, thinner, cost per job and cost per m² and sq ft.

Who It Is For

  • Fabricators and painters pricing paint for gates, grills, sheds and frames.
  • Contractors checking a painting quote.
  • Site engineers checking that a specified DFT is achievable.

How To Use It

  1. Add each member: shape, dimensions in mm and total length in metres. For sheets enter length and width in mm; both faces are counted.
  2. Enter the coating’s volume solids and DFT per coat from its data sheet.
  3. Set the number of coats and a loss allowance for your application method.
  4. Enter the price per litre for a cost.
  5. Click Calculate.

Inputs And Units Explained

  • Volume solids — the share of the paint that stays as dry film. On the data sheet.
  • DFT — dry film thickness per coat in microns.
  • Loss allowance — paint lost on the brush or roller, overspray, tins and uneven film.

How The Calculation Works

Surface per metre: round pipe π × OD; square or rectangular tube 2 × (A + B); flat bar 2 × (W + T); angle 2 × (A + B); sheet 2 × L × W. Spreading rate (m²/L) = volume solids % × 10 ÷ DFT (µm). Theoretical litres = area × coats ÷ spreading rate. Litres to buy = theoretical ÷ (1 − loss %). Wet film thickness = DFT × 100 ÷ volume solids.

Worked Example

The default job: a gate frame of 30 m of 40 × 40 tube, 60 m of 12 mm square bar infill and two 2400 × 1200 sheets, primed with a 45% volume-solids primer at 40 µm per coat, 2 coats, 30% loss.

Input or result Value
Surface 4.8 + 2.88 + 11.52 = 19.2 m²
Spreading rate 45 × 10 ÷ 40 = 11.25 m² per litre
Theoretical paint 19.2 × 2 ÷ 11.25 = 3.41 L
To buy with 30% loss 4.88 L
Wet film per coat about 89 µm

One 3.6 litre tin would not be enough; plan for two.

Features And Benefits

  • Surface from the member list, not a guess.
  • Data-sheet based spreading rate.
  • Separate theoretical and practical quantity.

Assumptions And Accuracy Limits

  • Surface uses outside dimensions; edges of flats and angles are ignored.
  • Real losses vary widely with method and weather.
  • Preparation and the paint system specification decide coating life, not the quantity.

Frequently Asked Questions

How much paint is needed for steel?

Area × coats ÷ spreading rate, plus losses. Spreading rate = volume solids % × 10 ÷ DFT in microns.

What is DFT in painting?

Dry film thickness: the thickness of the paint after it dries, in microns.

How do you calculate paint coverage?

Theoretical coverage in m² per litre = volume solids percentage × 10 ÷ DFT in microns.

How much paint for a steel gate?

List the gate’s members here. A gate with infill bars has far more surface than its outline.

What loss allowance should I use?

About 10–20% for brush and roller on simple shapes, 30–50% for spraying grills and open steel.

Related Free Tools

Get A Measured Quotation

Ramzan Steel Works fabricates, primes and finishes gates, grills and railings in Islamabad and Rawalpindi.

Share this
0304-2435577WhatsApp Us