Ramzan
Steel Works

Steel & workshop materials

Rolling Shutter Size, Weight And Coil Calculator

This calculator works out a rolling shutter from the clear opening: the curtain width including the part inside the guides, the number of slats, the curtain area and weight, the diameter of the curtain when rolled on the barrel, a suggested hood (box) size, guide channel lengths and the torque the springs or motor must handle. Add a rate per square foot for a rough price.

  • Free, no sign-up
  • Runs in your browser
  • Built for Islamabad & Rawalpindi

This free calculator runs in your browser and needs JavaScript. If it does not load, call or WhatsApp us on +92 304 2435577 and we will do the calculation for you.

Shop shutters in the market are usually priced by square foot, but the space above the opening and the weight decide what box, barrel and springs are needed. A 10 × 10 ft galvanised shutter weighs around 100 kg and needs a box about 330 mm deep.

What This Tool Does

Choose a slat type to fill in typical pitch, depth and weight, or enter your supplier’s figures. It draws the elevation with the coil in its box.

Who It Is For

  • Shop owners planning a shutter.
  • Fabricators cutting slats and guides.
  • Builders leaving space above the opening.

How To Use It

  1. Enter the clear opening.
  2. Choose the slat type or enter its pitch, depth and weight.
  3. Set the guide depth, coil allowance and barrel size.
  4. Click Calculate.

How The Calculation Works

Curtain width = opening + 2 × guide depth. Slats = (height + coil allowance) ÷ pitch, rounded up. Coil diameter D = √(d² + 4 × curtain length × slat depth ÷ π). Torque = weight × 9.81 × D ÷ 2.

Worked Example

A 10 × 10 ft (3,048 mm) opening with 0.9 mm galvanised slats at 75 mm pitch, 14 mm deep, 9.5 kg/m², a 114 mm barrel.

Input or result Value
Slats 45 × 3,128 mm
Curtain weight about 100 kg
Coil diameter about 270 mm
Box about 330 × 330 mm

About 133 N·m at the full coil, which the springs or motor must balance.

Features And Benefits

  • Slats, weight and coil in one place.
  • Box size before the lintel is built.
  • Elevation drawing.

Assumptions And Accuracy Limits

  • It does not size springs or motors; the supplier does.
  • Perforated, polycarbonate and grille shutters weigh differently.

Common Mistakes To Avoid

  • No room for the box. Leave the coil space above the opening before the lintel is cast.
  • Ignoring weight on wide shutters. Wide manual shutters become too heavy to lift safely.
  • Shallow guides. Wind can blow the curtain out of shallow channels.

Shutters In Islamabad And Rawalpindi

Rolling shutters are standard for shops, godowns and garages across the twin cities, mostly galvanised steel with manual springs, and motorised for larger openings. Load-shedding means motorised shutters need a manual override. Ramzan Steel Works fabricates and installs shutters measured on site.

Frequently Asked Questions

How do you calculate rolling shutter size?

Measure the clear opening. The curtain is wider by the depth that goes into each guide and taller by the length left on the roll.

How much does a rolling shutter weigh?

A galvanised steel curtain usually weighs about 7–13 kg per m², so a 10 × 10 ft shutter weighs roughly 75–130 kg.

What box size does a shutter need?

Slightly more than the rolled coil diameter, typically 250–400 mm for shop shutters.

Is a shutter priced per square foot?

Usually, by the opening area, with motors, locks and hoods priced separately.

Related Free Tools

Get A Measured Quotation

Ramzan Steel Works makes and fits rolling shutters for shops and garages in Islamabad and Rawalpindi.

Share this
0304-2435577WhatsApp Us